📺Video Tutorials

The Following Instructions are used to assemble the Mantis PVC Rover

01_Unboxing Mantis

Mantis Rover Assembly 1 Unboxing Mantis

02_Assemble Motor Mounts

Attach the Motor Mount with the raised side against the back (side opposite shaft) of the motor. Align the large circular cut-out on the Motor Mount to the large circular raise on the motor. Secure the Motor Mount using the #9 M4 x 8mm long screws and the 3mm Hex L-Key. Repeat for all 4 motors.

Mantis Rover Assembly 2 Assemble Motor Mounts

03_Assemble Elbow Mounts

Mantis Rover Assembly 3 Assemble Elbow Mounts

04_Frame Assembly

Mantis Rover Assembly 4 Frame Assembly

05_Splice Motor Wires

06_PCB Platform Assembly

Mantis Rover Assembly 6 PCB Platform Assembly

07_Crimp Fuse Holder Wires

Mantis Rover Assembly 7 Crimp Fuse Holder Wires

08_Interface Lip Assembly

Mantis Rover Assembly 8 Interface Lip Assembly

09_Junction Box Assembly

Mantis Rover Assembly 9 Junction Box Assembly

10_Assemble Wheels

Mantis Rover Assembly 10 Assembly Wheels

11_Add Wheels To Frame

Mantis Rover Assembly 11 Add Wheels To Frame

12_Top Cover

Mantis Rover Assembly 12 Top Cover